Description
The Goodman 2 Ton 15.2 SEER2 96% AFUE 60,000 BTU Gas Electric Air Conditioner Split System Upflow R-32 (GLXS5BA2410 / GR9T960603BN / CAPTA3626B3) is a complete residential heating and cooling solution designed for dependable year-round comfort. This matched system combines a 2-ton R-32 air conditioner, 96% AFUE gas furnace, and cased upflow evaporator coil for energy-efficient cooling and high-efficiency heating.
Designed for upflow installation, the system features a two-stage gas furnace and a multi-speed ECM blower motor for improved comfort, consistent airflow, and efficient operation. Its upflow configuration draws return air through the bottom and supplies conditioned air from the top, making it suitable for closets, basements, utility rooms, and other vertical installations.
Key Features
- 2 Ton Cooling Capacity – Delivers 24,000 BTU of residential cooling
- 15.2 SEER2 Efficiency – Supports energy-efficient cooling performance
- 60,000 BTU Gas Furnace – Provides dependable two-stage heating
- 96% AFUE Efficiency – Converts approximately 96% of fuel into usable heat
- Two-Stage Heating – Adjusts heating output for improved temperature control
- Upflow R-32 System – Designed for vertical residential installations
System Components Included
- Goodman GLXS5BA2410 2 Ton 15.2 SEER2 R-32 Air Conditioner
- Goodman GR9T960603BN 60,000 BTU 96% AFUE Two-Stage Gas Furnace
- Goodman CAPTA3626B3 Cased Upflow/Downflow R-32 Evaporator Coil
Compatibility & Installation Notes
The GLXS5BA2410 / GR9T960603BN / CAPTA3626B3 system is designed for residential upflow applications. The evaporator coil has a larger nominal capacity than the outdoor condenser and may be paired with the 2-ton air conditioner to support the system’s rated efficiency. The exact AHRI-rated combination, ductwork, electrical service, gas supply, refrigerant lines, condensate drainage, thermostat, and approved high-efficiency furnace venting must be confirmed before installation.
Installation Notes
- Verify compatibility with the existing upflow ductwork
- Confirm the complete system combination and efficiency through an AHRI match
- Confirm electrical service and natural gas connection requirements
- Check the required refrigerant line sizes before installation
- Install approved high-efficiency furnace venting
- Provide proper drainage for the furnace and evaporator coil condensate
- Use a compatible two-stage thermostat for full staging functionality
- Maintain required clearances and follow applicable local codes
- Installation should be completed by a qualified HVAC professional
Frequently Asked Questions
What is included in this Goodman HVAC system?
The package includes the GLXS5BA2410 air conditioner, GR9T960603BN gas furnace, and CAPTA3626B3 evaporator coil.
What is the cooling capacity of this system?
The system provides 2 tons or 24,000 BTU of cooling capacity.
Is the furnace single-stage or two-stage?
The Goodman GR9T960603BN is a two-stage gas furnace, allowing it to operate at a lower heating level during milder conditions and increase output when additional heat is required.
What does 96% AFUE mean?
It means approximately 96% of the furnace’s fuel is converted into usable heating energy, providing an estimated maximum heating output of 57,600 BTU.
Why is the evaporator coil larger than the air conditioner?
A larger nominal evaporator coil may be paired with a smaller outdoor condenser to help achieve the intended cooling efficiency. The complete combination should be verified using its AHRI certification.
What does upflow installation mean?
An upflow system draws return air through the bottom and sends heated or cooled air upward through the supply ductwork.
White Paper
- Goodman GLXS5B Spec Sheet
- Goodman GLXS Split AC Installation Manual
- Goodman GR9T96/GD9T96 Spec Sheet
- Goodman Evaporator Coil Spec Sheet
- Goodman CAPTA/CAPFA Coil Installation Manual
- Goodman GLXS5BA Repair Parts List (RP-G4347A)
- Goodman GR9T Repair Parts List – Rev AA/AB (RP-G2360A)
- Goodman CAPTA Repair Parts List (RP-4359A)
