Goodman 2 Ton 16 SEER2 80% AFUE 80,000 BTU Gas Electric Air Conditioner Split System Upflow R-32 | GLXS5BA2410 GR9T800803BN CAPTA3626B3

The Goodman 2 Ton 16 SEER2 80% AFUE 80,000 BTU Gas Electric Air Conditioner Split System Upflow R-32 (GLXS5BA2410 / GR9T800803BN / CAPTA3626B3) is a complete residential heating and cooling solution designed for dependable year-round comfort. This matched system combines a 2-ton R-32 air conditioner, 80% AFUE gas furnace, and cased upflow evaporator coil for energy-efficient cooling and reliable heating.

Designed for upflow installation, the system draws return air through the bottom and supplies conditioned air from the top. The two-stage gas furnace features a multi-speed ECM blower motor for improved temperature control, consistent airflow, and efficient operation.

Key Features

• 2 Ton Cooling Capacity – Delivers 24,000 BTU of residential cooling
• 16 SEER2 Efficiency – Supports energy-efficient cooling performance
• 80,000 BTU Gas Furnace – Provides dependable two-stage heating
• 80% AFUE Efficiency – Converts approximately 80% of fuel into usable heat
• Multi-Speed ECM Blower – Promotes consistent airflow and efficient operation
• Upflow R-32 System – Designed for vertical residential installations

System Components Included

• Goodman GLXS5BA2410 2 Ton 16 SEER2 R-32 Air Conditioner
• Goodman GR9T800803BN 80,000 BTU 80% AFUE Two-Stage Gas Furnace
• Goodman CAPTA3626B3 3 Ton Cased Upflow/Downflow R-32 Evaporator Coil

Compatibility & Installation Notes

The GLXS5BA2410 / GR9T800803BN / CAPTA3626B3 system is intended for residential upflow applications. The nominally larger 3-ton evaporator coil may be paired with the 2-ton condenser to help achieve the specified efficiency. The complete equipment combination and efficiency rating should be confirmed through the applicable AHRI certification.

Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, and approved furnace venting must be confirmed before installation. A compatible two-stage thermostat is recommended to access the furnace’s complete staging capabilities.

Specifications

• System Type: Gas Electric Split System
• Cooling Capacity: 2 Ton / 24,000 BTU
• Evaporator Coil Capacity: 3 Ton
• Heating Input: 80,000 BTU
• Heating Output: Approximately 64,000 BTU
• Cooling Efficiency: 16 SEER2
• Furnace Efficiency: 80% AFUE
• Furnace Stages: Two-Stage
• Blower Motor: Multi-Speed ECM
• Refrigerant/Orientation: R-32 / Upflow

Installation Notes

• Verify compatibility with the existing upflow ductwork
• Complete heating and cooling load calculations before installation
• Confirm electrical service and natural gas connection requirements
• Check the required refrigerant line sizes before installation
• Install approved furnace venting
• Provide proper evaporator coil condensate drainage
• Use a compatible two-stage thermostat for optimal heating control
• Verify clearance and duct transitions for the larger evaporator coil
• Verify the matched system and efficiency rating with an AHRI certificate
• Installation should be completed by a qualified HVAC professional

Frequently Asked Questions

What is included in this Goodman HVAC system?

The package includes the GLXS5BA2410 air conditioner, GR9T800803BN gas furnace, and CAPTA3626B3 cased evaporator coil.

What is the cooling capacity of this system?

The air conditioner provides 2 tons or 24,000 BTU of cooling capacity.

Why is a 3-ton evaporator coil paired with a 2-ton air conditioner?

A nominally larger evaporator coil may be paired with a smaller condenser to help achieve the system’s specified efficiency. The complete combination should be verified through its applicable AHRI certification.

Is the furnace single-stage or two-stage?

The Goodman GR9T800803BN is a two-stage gas furnace, allowing it to operate at a lower heating level during mild conditions and increase its output when additional heat is required.

What does 80% AFUE mean?

It means approximately 80% of the furnace’s fuel is converted into usable heating energy, providing an estimated heating output of 64,000 BTU.

What does upflow installation mean?

In an upflow installation, return air enters through the bottom of the furnace and conditioned air exits through the top.

Does this system use R-32 refrigerant?

Yes. The air conditioner and evaporator coil are designed for R-32 refrigerant