Description
The Goodman 3.5 Ton 15.2 SEER2 92% AFUE 80,000 BTU Gas Electric Air Conditioner Split System Upflow with R-32 Refrigerant (GLXS4BA4210-GR9S920805CN-CAPTA6030C3) is a matched residential HVAC system designed to provide efficient cooling and dependable gas heating for year-round indoor comfort. This configuration combines the GLXS4BA4210 outdoor air conditioner, GR9S920805CN gas furnace, and CAPTA6030C3 cased evaporator coil for an upflow installation.
With a nominal 3.5-ton / 42,000 BTU cooling capacity, 15.2 SEER2 cooling efficiency, and an 80,000 BTU furnace rated at 92% AFUE, this Goodman system delivers a balanced combination of cooling performance and efficient heating operation. The cooling circuit uses R-32 lower-GWP refrigerant, while the upflow configuration supports applications where conditioned air is distributed upward through the duct system.
Key Features
- 3.5 Ton Cooling Capacity – Provides approximately 42,000 BTU of nominal cooling capacity
- 15.2 SEER2 Efficiency – Designed for efficient seasonal cooling performance
- 80,000 BTU Gas Furnace – Provides reliable heating capacity for residential applications
- 92% AFUE Rating – High-efficiency furnace helps improve fuel utilization during heating operation
- Single-Stage Gas Furnace – Provides dependable and straightforward heating performance
- Upflow R-32 System – Upflow configuration using modern lower-GWP R-32 refrigerant technology
Benefits
- Provides reliable cooling and efficient gas heating from one matched HVAC system
- 92% AFUE furnace helps reduce heating energy loss compared with standard-efficiency models
- 15.2 SEER2 cooling performance supports efficient seasonal operation
- Upflow design works with many common residential duct configurations
Compatibility & Installation
The Goodman GLXS4BA4210-GR9S920805CN-CAPTA6030C3 package combines the primary components required for an upflow gas/electric split-system installation. Proper sizing, airflow setup, refrigerant installation, and professional commissioning are required to achieve the listed performance.
Installation considerations:
- Verify the 3.5-ton cooling and 80,000 BTU heating capacities match the home's requirements
- Confirm ductwork supports the required upflow airflow configuration
- Verify gas supply, electrical connections, furnace venting, and condensate drainage requirements
- Follow R-32 A2L refrigerant handling and safety requirements
- Install according to Goodman instructions and applicable HVAC codes
Frequently Asked Questions
What cooling capacity does this Goodman system provide?
The system provides a nominal 3.5-ton cooling capacity, equivalent to approximately 42,000 BTU.
What is the cooling efficiency rating?
This matched configuration is listed at 15.2 SEER2.
What is the furnace capacity and efficiency?
The GR9S920805CN furnace has an 80,000 BTU input capacity and is rated at 92% AFUE.
Is the furnace single-stage or two-stage?
The GR9S920805CN is a single-stage gas furnace, designed for dependable residential heating.
What refrigerant does this system use?
The air-conditioning circuit uses R-32, a lower-GWP A2L refrigerant used in newer HVAC systems.
What installation orientation does this system support?
This configuration is designed for upflow installation, where conditioned air moves upward into the supply ductwork.
White Paper
- Goodman GLXS4B Spec Sheet
- Goodman GLXS Split AC Installation Manual
- Goodman GR9S92 Spec Sheet
- Goodman Evaporator Coil Spec Sheet
- Goodman CAPTA/CAPFA Coil Installation Manual
- Goodman GLXS4BA Repair Parts List (RP-G4341A)
- Goodman GR9S Repair Parts List (RP-G2356)
- Goodman CAPTA Repair Parts List (RP-4359A)
