Description
The Goodman 3 Ton 15.2 SEER2 96% AFUE 80,000 BTU Gas Electric Air Conditioner Split System Downflow R-32 (GLXS5BA3610 / GD9S960804CN / CAPTA4230C3) is a complete residential heating and cooling solution designed for efficient year-round comfort. This matched system combines a 3-ton R-32 air conditioner, 96% AFUE single-stage gas furnace, and 3.5-ton cased evaporator coil for energy-efficient cooling and high-efficiency heating.
Designed for downflow installation, the system features a single-stage gas valve and a multi-speed ECM blower motor for consistent airflow and efficient operation. Its downflow configuration is suitable for properties where conditioned air is supplied through ductwork located beneath the furnace.
Key Features
- 3 Ton Cooling Capacity – Delivers 36,000 BTU of residential cooling
- 15.2 SEER2 Efficiency – Supports energy-efficient cooling performance
- 80,000 BTU Gas Furnace – Provides dependable single-stage heating
- 96% AFUE Efficiency – Converts approximately 96% of fuel into usable heat
- Multi-Speed ECM Blower – Supports consistent and efficient airflow
- Downflow R-32 System – Designed for residential downflow applications
System Components Included
- Goodman GLXS5BA3610 3 Ton 15.2 SEER2 R-32 Air Conditioner
- Goodman GD9S960804CN 80,000 BTU 96% AFUE Single-Stage Downflow Gas Furnace
- Goodman CAPTA4230C3 3.5 Ton Cased Upflow/Downflow R-32 Evaporator Coil
Compatibility & Installation Notes
The GLXS5BA3610 / GD9S960804CN / CAPTA4230C3 system is designed for residential downflow applications. The evaporator coil has a larger nominal capacity than the outdoor condenser and may be paired with the 3-ton air conditioner to support the rated system efficiency.
Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, thermostat, high-efficiency furnace venting, and required downflow accessories must be confirmed before installation.
Installation Notes
- Verify compatibility with the existing downflow ductwork
- Confirm electrical service and natural gas connection requirements
- Check the required refrigerant line sizes before installation
- Install approved high-efficiency furnace venting
- Provide proper furnace and evaporator-coil condensate drainage
- Confirm whether a combustible-floor base or other downflow accessories are required
- Verify the complete system’s AHRI-rated combination
- Installation should be completed by a qualified HVAC professional
Frequently Asked Questions
What is included in this Goodman HVAC system?
The package includes the GLXS5BA3610 air conditioner, GD9S960804CN gas furnace, and CAPTA4230C3 cased evaporator coil.
What is the cooling capacity of this system?
The system provides 3 tons or 36,000 BTU of cooling capacity.
Why does the system use a 3.5-ton evaporator coil with a 3-ton air conditioner?
A larger nominal evaporator coil may be paired with the 3-ton condenser to achieve the system’s intended efficiency and performance. The applicable AHRI-rated combination should be confirmed before installation.
Is the furnace single-stage or two-stage?
The Goodman GD9S960804CN is a single-stage gas furnace that provides consistent heating output.
What does 96% AFUE mean?
It means approximately 96% of the furnace’s fuel is converted into usable heating energy, providing an estimated heating output of 76,800 BTU.
White Paper
- Goodman GLXS5B Spec Sheet
- Goodman GLXS Split AC Installation Manual
- Goodman GR9S96/GD9S96 Spec Sheet
- Goodman Evaporator Coil Spec Sheet
- Goodman CAPTA/CAPFA Coil Installation Manual
- Goodman GLXS5BA Repair Parts List – Rev AA/AB (RP-G4347A)
- Goodman GD9S Repair Parts List (RP-G2357A)
- Goodman CAPTA Repair Parts List (RP-4359A)
