Goodman 3 Ton 15.2 SEER2 96% AFUE 80,000 BTU Gas Electric Air Conditioner Split System Upflow R-32 | GLXS5BA3610 GR9S960805CN CAPTA3626C3

Designed for upflow installation, the system draws return air through the bottom and supplies conditioned air from the top. The furnace features single-stage heating and a multi-speed ECM blower motor for consistent airflow and efficient operation.

Key Features

• 3 Ton Cooling Capacity – Delivers 36,000 BTU of residential cooling
• 15.2 SEER2 Efficiency – Supports energy-efficient cooling performance
• 80,000 BTU Gas Furnace – Provides dependable single-stage heating
• 96% AFUE Efficiency – Converts approximately 96% of fuel into usable heat
• Upflow R-32 Configuration – Suitable for basements, closets, utility rooms, and mechanical rooms
• Multi-Speed ECM Blower – Promotes consistent airflow and efficient operation
• Matched 3 Ton Coil – Supports proper cooling capacity and system performance

System Components Included

• Goodman GLXS5BA3610 3 Ton 15.2 SEER2 R-32 Air Conditioner
• Goodman GR9S960805CN 80,000 BTU 96% AFUE Single-Stage Gas Furnace
• Goodman CAPTA3626C3 3 Ton Cased Upflow/Downflow R-32 Evaporator Coil

Compatibility & Installation Notes

The GLXS5BA3610 / GR9S960805CN / CAPTA3626C3 system is designed for residential upflow applications. Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, and approved high-efficiency furnace venting must be confirmed before installation.

The complete equipment combination should also be checked against applicable AHRI matching data to verify its certified efficiency and performance ratings.

Specifications

• System Type: Gas Electric Split System
• Cooling Capacity: 3 Ton / 36,000 BTU
• Evaporator Coil Capacity: 3 Ton / 36,000 BTU nominal
• Heating Input: 80,000 BTU
• Heating Output: Approximately 76,800 BTU
• Cooling Efficiency: 15.2 SEER2
• Furnace Efficiency: 96% AFUE
• Furnace Stages: Single-Stage
• Blower Motor: Multi-Speed ECM
• Refrigerant: R-32
• Installation Orientation: Upflow

Installation Notes

• Verify compatibility with the existing upflow ductwork
• Confirm electrical service and natural gas connection requirements
• Check the required refrigerant line sizes before installation
• Install approved high-efficiency furnace venting
• Provide proper drainage for both the condensing furnace and evaporator coil
• Confirm adequate installation and service clearances
• Verify the complete system’s AHRI-rated performance
• Installation should be completed by a qualified HVAC professional

Frequently Asked Questions

What is included in this Goodman HVAC system?

The package includes the GLXS5BA3610 air conditioner, GR9S960805CN gas furnace, and CAPTA3626C3 cased evaporator coil.

What is the cooling capacity of this system?

The system provides 3 tons or 36,000 BTU of cooling capacity.

Is the furnace single-stage or two-stage?

The Goodman GR9S960805CN is a single-stage gas furnace that delivers consistent heating output.

What is the approximate heating output?

With a 96% AFUE rating, the 80,000 BTU furnace furnace provides approximately 76,800 BTU of usable heating output.

How does an upflow HVAC system operate?

An upflow system draws return air through the bottom of the furnace and supplies heated or cooled air from the top into the ductwork.

Does this condensing furnace require drainage?

Yes. A 96% AFUE condensing furnace produces condensate and requires an approved drainage system in addition to the evaporator coil drain.

Does this system use R-32 refrigerant?

Yes. The air conditioner and evaporator coil are designed for R-32 refrigerant.