Description
The MRCOOL Hyper Heat Central Ducted 2nd Gen 3-ton heat pump split system pairs the CENTRAL-36-HP-C-230B00-O outdoor unit with the MVP-36-HP-MUAH-230A00-O multi-position air handler as an AHRI-matched set (AHRI Reference No. 216032532). The pair is certified at 17.4 SEER2, 11.7 EER2 and 10.3 HSPF2, with 36,000 BTU/h of rated cooling and 37,000 BTU/h of heating at 47°F, using R-454B refrigerant.
This is MRCOOL's cold-climate central system. MRCOOL rates the Hyper Heat line for up to 100% heating output at -5°F and full cooling output at 109°F, so it can carry a home through northern winters without leaning on backup heat the way a standard heat pump does.
Outdoor unit
The outdoor unit pairs an enhanced-heating DC inverter compressor with Gold Fin corrosion-resistant coil coating and a side-discharge cabinet. Because the compressor modulates rather than cycling at full power, the house sees steadier temperatures, quieter operation and lower energy use through most of the season. It runs on a 208/230V single-phase circuit (29.0 A minimum circuit ampacity, 30.0 A maximum breaker) and connects with a 3/8 in liquid line and 3/4 in suction line. It ships charged for 24.6 ft of line set, with runs up to 246 ft (75 m) and 98.4 ft (30 m) of lift.
Indoor unit
It pairs with MRCOOL's MUAH multi-position air handler, which installs upflow, downflow, horizontal left or horizontal right. The ECM blower holds airflow steady as the filter loads, the blower slides out for service, and the filter rack has a magnetic cover. An electronic expansion valve meters the refrigerant, and an MRCOOL smart thermostat comes in the box along with a 24V adapter for a standard wall thermostat.
Backup heat and controls
Electric heat is optional and sold separately. The MVP-36-HP-MUAH-230A00-O accepts MRCOOL MVPHK heat kits in 5 kW, 8 kW, 10 kW, 15 kW, 20 kW sizes, which slide into the cabinet and carry their own circuit breakers. Choose a size from the heat strip menu on this page if you want emergency or supplemental heat. The included MRCOOL smart thermostat handles cooling, heating and the heat kit stages. MRCOOL backs Hyper Heat with 10 years on the compressor, 10 years on parts and 10 years of labor coverage.
Key Features
- AHRI matched: Certified pair, AHRI No. 216032532, at 17.4 SEER2 and 10.3 HSPF2
- Inverter compressor: Variable-speed operation for steady temperatures and lower energy use
- Multi-position air handler: Upflow, downflow or horizontal in either direction
- Cold-climate heating: Up to 100% heating output at -5°F per MRCOOL
Frequently Asked Questions
What comes with this system?
One CENTRAL-36-HP-C-230B00-O heat pump condenser and one MVP-36-HP-MUAH-230A00-O air handler, plus the MRCOOL smart thermostat. The line set, electric heat kit, condenser pad, disconnect and electrical whip are separate.
Which electric heat kits fit this system?
MRCOOL approves the 5 kW, 8 kW, 10 kW, 15 kW, 20 kW MVPHK kits for the MVP-36-HP-MUAH-230A00-O. Size the kit to the home's heat loss and the supply circuit you have available.
What line set size does it need?
A 3/8 in liquid line and 3/4 in suction line. The condenser is charged for 24.6 ft of line set; longer runs need 0.7 oz of R-454B per additional foot, up to 246 ft (75 m).
Is this system AHRI certified?
Yes. This exact combination is listed under AHRI Reference No. 216032532, which is what utilities and tax-credit programs ask for when you apply for a rebate.
Does it need a professional installer?
Yes. It is a split system that is brazed or flared, evacuated and charged on site, so it should be installed by a licensed HVAC contractor. Local codes and efficiency requirements vary, so have your installer confirm the system for your area.
