Description
The MRCOOL VersaPro 2nd Gen 3-ton heat pump split system pairs the MVP-36-HP-C-230A00-O outdoor unit with the MVP-36-HP-MUAH-230A00-O multi-position air handler as an AHRI-matched set (AHRI Reference No. 216032538). The pair is certified at 16.2 SEER2, 10 EER2 and 8.7 HSPF2, with 36,000 BTU/h of rated cooling and 36,000 BTU/h of heating at 47°F, using R-454B refrigerant.
It is built for the heating and cooling loads of most of the country, and it keeps running efficiently in mild to moderately cold winters, with an electric heat kit available for colder snaps.
Outdoor unit
The outdoor unit uses a variable-speed DC inverter compressor that ramps up and down with the load instead of cycling on and off at full power. The coil carries MRCOOL's Gold Fin coating to resist corrosion, and the painted galvanized steel cabinet discharges air out the side, so it fits along a side yard where a tall top-discharge condenser would not. It runs on a 208/230V single-phase circuit (24 A minimum circuit ampacity, 30 A maximum breaker) and connects with a 3/8 in liquid line and 3/4 in suction line. It ships charged for 24.6 ft of line set, with runs up to 164 ft (50 m) and 98.4 ft (30 m) of lift.
Indoor unit
The matching MUAH air handler installs upflow, downflow, horizontal left or horizontal right. Its ECM blower adjusts itself to hold airflow steady as the filter loads up, the blower slides out for service, and the filter rack has a magnetic cover so changing filters takes seconds. An electronic expansion valve meters the refrigerant, and an MRCOOL smart thermostat comes in the box along with a 24V adapter for a standard wall thermostat.
Backup heat and controls
Electric heat is optional and sold separately. The MVP-36-HP-MUAH-230A00-O accepts MRCOOL MVPHK heat kits in 5 kW, 8 kW, 10 kW, 15 kW, 20 kW sizes, which slide into the cabinet and carry their own circuit breakers. Choose a size from the heat strip menu on this page if you want emergency or supplemental heat. The included MRCOOL smart thermostat handles cooling, heating and the heat kit stages. MRCOOL covers the compressor and parts for 10 years.
Key Features
- AHRI matched: Certified pair, AHRI No. 216032538, at 16.2 SEER2 and 8.7 HSPF2
- Inverter compressor: Variable-speed operation for steady temperatures and lower energy use
- Multi-position air handler: Upflow, downflow or horizontal in either direction
- Smart thermostat included: MRCOOL smart thermostat and 24V adapter in the box
Frequently Asked Questions
What comes with this system?
One MVP-36-HP-C-230A00-O heat pump condenser and one MVP-36-HP-MUAH-230A00-O air handler, plus the MRCOOL smart thermostat. The line set, electric heat kit, condenser pad, disconnect and electrical whip are separate.
Which electric heat kits fit this system?
MRCOOL approves the 5 kW, 8 kW, 10 kW, 15 kW, 20 kW MVPHK kits for the MVP-36-HP-MUAH-230A00-O. Size the kit to the home's heat loss and the supply circuit you have available.
What line set size does it need?
A 3/8 in liquid line and 3/4 in suction line. The condenser is charged for 24.6 ft of line set; longer runs need 0.7 oz of R-454B per additional foot, up to 164 ft (50 m).
Is this system AHRI certified?
Yes. This exact combination is listed under AHRI Reference No. 216032538, which is what utilities and tax-credit programs ask for when you apply for a rebate.
Does it need a professional installer?
Yes. It is a split system that is brazed or flared, evacuated and charged on site, so it should be installed by a licensed HVAC contractor. Local codes and efficiency requirements vary, so have your installer confirm the system for your area.
