Description
Comfortstar BAH17 2 Ton Heat Pump Split System (BAH17-24-15 + LUC17-24-15)
This is a complete, AHRI matched heat pump system from Comfortstar: the BAH17-24-15 top-discharge heat pump and the LUC17-24-15 multi-position air handler, running on R-32. Together they are rated at 23,000 BTU/h cooling, 23,000 BTU/h heating, 14.3 SEER2 and 11.7 EER2 with 7.5 HSPF2 under AHRI certificate 218396750.
The outdoor unit is a straightforward single-stage rotary heat pump: fewer parts, simple 24V controls and easy service. It heats down to -4°F and still delivers about 12,000 BTU/h at 5°F, which covers the vast majority of the country without backup heat in mild climates.
Indoors, the LUC17-24-15 installs upflow, downflow or horizontal, so it works in closets, attics and crawl spaces. Its ECM blower moves up to 650 CFM and the system runs on a standard 24V heat pump thermostat, so no proprietary controls are required.
Heat Pump: BAH17-24-15 Specifications
- Nominal Capacity (Tons): 2
- Rated Cooling Capacity (BTU/h): 23,000
- Rated Heating Capacity @ 47°F (BTU/h): 23,000
- Heating Capacity @ 5°F (BTU/h): 12,000
- Compressor: Single-Stage Rotary
- Discharge: Top
- Refrigerant: R-32
- Voltage/Phase/Hz: 208-230 V / 1 Ph / 60 Hz
- MCA / MOP: 20 A / 25 A
- Liquid / Suction Line: 3/8" / 3/4"
- Max Line Length: 131 ft (pre-charged for 25 ft)
- Operating Range: Cooling 23°F to 125.6°F / Heating -4°F to 86°F
- Sound Level: 58 dBA
- Dimensions (W x D x H): 23 5/8" x 23 5/8" x 25"
- Net / Shipping Weight: 119 lb / 126 lb
Air Handler: LUC17-24-15 Specifications
- Configuration: Multi-Position
- Blower Motor: ECM
- Airflow (CFM, high to low): 650 / 420
- Refrigerant: R-32
- Voltage/Phase/Hz: 208-230 V / 1 Ph / 60 Hz
- MCA / MOP (without heat): 3.5 A / 6 A
- Electric Heat: Field-installed heat strip, sold separately
- Dimensions (W x D x H): 17 33/64" x 21 1/32" x 45"
- Net Weight: 114 lb
System Ratings
- AHRI Reference Number: 218396750
- SEER2: 14.3
- EER2: 11.7
- HSPF2: 7.5
Both units ship separately. Line set, thermostat, disconnect, condenser pad, filter and electric heat strip are sold separately. Installation and service require a licensed HVAC technician.
