Description
The Goodman 2 Ton 16 SEER2 80% AFUE 80,000 BTU Gas Electric Air Conditioner Split System Upflow R-32 (GLXS5BA2410 / GR9S800804CX / CAPTA3626C3) is a complete residential heating and cooling solution designed for dependable year-round comfort. This matched system combines a 2-ton R-32 air conditioner, 80% AFUE gas furnace, and 3-ton cased evaporator coil for energy-efficient cooling and reliable heating.
Designed for upflow installation, the system features a single-stage gas furnace and a multi-speed ECM blower motor for consistent airflow and efficient operation. Its upflow configuration is suitable for basements, utility rooms, closets, and other applications where conditioned air is supplied from the top of the furnace.
Key Features
- 2 Ton Cooling Capacity – Delivers 24,000 BTU of residential cooling
- 16 SEER2 Efficiency – Provides energy-efficient cooling performance
- 80,000 BTU Gas Furnace – Delivers dependable single-stage heating
- 80% AFUE Efficiency – Converts approximately 80% of fuel into usable heat
- Multi-Speed ECM Blower – Supports consistent and efficient airflow
- Upflow R-32 System – Designed for residential upflow applications
System Components Included
- Goodman GLXS5BA2410 2 Ton R-32 Air Conditioner
- Goodman GR9S800804CX 80,000 BTU 80% AFUE Single-Stage Gas Furnace
- Goodman CAPTA3626C3 3 Ton Cased Upflow/Downflow R-32 Evaporator Coil
Compatibility & Installation Notes
The GLXS5BA2410 / GR9S800804CX / CAPTA3626C3 system is designed for residential upflow applications. The evaporator coil has a larger nominal capacity than the outdoor condenser and may be paired with the 2-ton air conditioner to support the rated system efficiency.
Compatibility with the property’s ductwork, electrical service, natural gas supply, refrigerant lines, condensate drainage, thermostat, and furnace venting must be confirmed before installation. The complete system combination and applicable AHRI-rated performance should also be verified.
Installation Notes
- Verify compatibility with the existing upflow ductwork
- Confirm electrical service and natural gas connection requirements
- Check the required refrigerant line sizes before installation
- Install properly sized and approved furnace venting
- Provide proper evaporator-coil condensate drainage
- Confirm the complete system’s AHRI-rated combination
- Installation should be completed by a qualified HVAC professional
Frequently Asked Questions
What is included in this Goodman HVAC system?
The package includes the GLXS5BA2410 air conditioner, GR9S800804CX gas furnace, and CAPTA3626C3 cased evaporator coil.
What is the cooling capacity of this system?
The system provides 2 tons or 24,000 BTU of cooling capacity.
Why does the system use a 3-ton evaporator coil with a 2-ton air conditioner?
A larger nominal evaporator coil may be paired with the 2-ton condenser to achieve the system’s intended efficiency and performance. The applicable AHRI-rated combination should be confirmed before installation.
Is the furnace single-stage or two-stage?
The Goodman GR9S800804CX is a single-stage gas furnace that delivers consistent heating output.
What does 80% AFUE mean?
It means approximately 80% of the furnace’s fuel is converted into usable heating energy, providing an estimated heating output of 64,000 BTU.
Is this system designed for upflow installation?
Yes. This system is configured for upflow installation, meaning return air enters through the bottom and conditioned air is discharged from the top.
Does this system use R-32 refrigerant?
Yes. The air conditioner and evaporator coil are designed for R-32 refrigerant.
White Paper
- Goodman GLXS5B Spec Sheet
- Goodman GLXS Split AC Installation Manual
- Goodman GR9S80/GD9S80 Spec Sheet
- Goodman GR9S80/GD9S80 Installation Manual
- Goodman Evaporator Coil Spec Sheet
- Goodman CAPTA/CAPFA Coil Installation Manual
- Goodman GLXS5BA Repair Parts List (RP-G4347A)
- Goodman GR9S Repair Parts List (RP-G2353)
- Goodman CAPTA Repair Parts List (RP-4359A)
